IIIT-Delhi Institutional Repository

Browsing by Author "Hashmi, Mohammad S. (Advisor)"

Browsing by Author "Hashmi, Mohammad S. (Advisor)"

Sort by: Order: Results:

  • Malhotra, Sambhav; Hashmi, Mohammad S. (Advisor); Biswas, Sanat (Advisor); Saurabh, Sneh (Advisor) (IIITD-Delhi, 2018-11-18)
    A 16-bit Chipless RFID tags have been proposed in this report. The design will be fabricated on a Rogers RT 5880 board with a dielectric constant of 2.2 and a loss tangent of 0.0009. The tag is based on the concept of ...
  • Maktoomi, Md Ayatullah; Hashmi, Mohammad S. (Advisor) (2016-10-14)
    The proliferation of multi-band and multi-standard wireless systems are well known but very little is known about the challenges associated in the design and development of such systems. For example, the RF front-ends in ...
  • Vithalkar, Amogh; Hashmi, Mohammad S. (Advisor) (IIIT-Delhi, 2018-04-18)
    Radio Frequency Identification(RFID) has been gaining popularity recently over barcodes for a wide range of applications like inventory control, supply chain management, manufacturing,etc. With the increasing popularity ...
  • Ummalaneni, Vahini; Hashmi, Mohammad S. (Advisor) (IIIT-Delhi, 2017-04-18)
    In the course of this BTP,low cost chipless RFID tags have been designed. The proposed RFID tags are fully passive devices. They do not require chip assembly or any power supply. In the previous semester, the tag studied ...
  • Singh Nirwan, Bhawana; Hashmi, Mohammad S. (Advisor) (2015-12-07)
    Non-volatile memories have continued to retrieve their stronghold presence in the electronic industry wherever memory intensive applications are required. The present technologies like Flash have dominated the industry ...
  • Arora, Disha; Hashmi, Mohammad S. (Advisor) (2016-09-12)
    The growing gap between the processor and embedded memory speed is a major setback in the overall performance of electronic systems. Since the sense amplifier (SA) forms an integral part of the read circuitry in both ...
  • Khandelwal, Rimjhim; Hashmi, Mohammad S. (Advisor) (2017-05)
    Power conditioning circuits form an integral part of a memory chip. Various blocks on a memory chip require uninterrupted power supply that are independent of the load conditions. The program, erase and read operations in ...
  • Banerjee, Deepayan; Hashmi, Mohammad S. (Advisor) (2017-03)
    Power Amplifiers are undoubtedly one of the most important blocks in any transmitter system. Long range communication requires a massive boost-up of the power to be delivered, before it can be launched in the channel. This ...
  • Sharma, Vijay; Hashmi, Mohammad S. (Advisor) (2016-10-05)
    Low Noise Amplifiers (LNA) are key components in the receiving end of nearly every communication system. Primary purpose of the LNA is to amplify the received signal while at the same time adding as little additional noise ...
  • Ahlawat, Anuradha; Hashmi, Mohammad S. (Advisor) (2017-08)
    Branch-line coupler and phase shifter are widely used passive components in RF and microwave communication systems. The designing of circuits operating at multi-band frequencies has the advantage of both compact size and ...
  • N., Nalla Anandakumar; Sanadhya, Somitra Kumar (Advisor); Hashmi, Mohammad S. (Advisor) (IIIT-Delhi, 2019-09)
    Internet of Things (IoT) is a vast and rapidly growing technology right now in the world of innovation. Billions of new electronic devices are going to be connected to the internet in wide-ranging applications. With this ...
  • Singh, Vikas Vikram; Hashmi, Mohammad S. (Advisor) (IIIT-Delhi, 2018-04-18)
  • Singh, Vikas Vikram; Hashmi, Mohammad S. (Advisor) (IIIT-Delhi, 2018-04-18)
  • Singh, Vikas Vikram; Hashmi, Mohammad S. (Advisor) (IIIT-Delhi, 2020-04)
  • Bansal, Shrestha; Hashmi, Mohammad S. (Advisor) (2017)
    Most modern circuit designs have a mix of analog and digital circuit blocks integrated on a single chip. Such designs require a dedicated power man- agement unit to provide a stable, regulated and clean power supply. This ...
  • Batra, Nidhi; Hashmi, Mohammad S. (Advisor) (2016-09-12)
    Embedded memories will continue to dominate the System-on-Chip (SoC) area in subsequent years. SRAMs are designed to exploit the technology limits to achieve highest storage capacity, minimum access times and operating ...
  • Rahman, Mir Mohsina; Hashmi, Mohammad S. (Advisor) (2014-07-11)
    Recent trends show increasing cases of implantable devices for monitoring and control of organs such as heart. The implantation of devices requires a multi stage evaluation process in order to make sure that these devices ...
  • Maktoomi, Md Ayatullah; Hashmi, Mohammad S. (Advisor) (2016-09-13)
    The power dividers are one of the most ubiquitous passive circuit elements in RF/Microwave applications. They are widely used in antenna arrays, balanced amplifiers, mixers, frequency multipliers etc. as power combiners ...
  • Singh, Ankush; Hashmi, Mohammad S. (Advisor) (2017-06)
    Low Dropout Regulators (LDOs) are extensively used in many applications ranging from high power system to the portable application like mobile phones, PDAs and notebooks. These portable applications demand high power ...
  • Kalla, Shivam; Hashmi, Mohammad S. (Advisor) (2017)
    Audio applications necessitate precise data conversion from analog to digital domain. This high resolution conversion can be achieved by using Sigma-Delta architecture, which operates at oversampling rate and exhibits ...

Search Repository

Browse

My Account