Please use this identifier to cite or link to this item: http://repository.iiitd.edu.in/xmlui/handle/123456789/603
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBatra, Shipra-
dc.contributor.authorHashmi, Mohammad S. (Advisor)-
dc.date.accessioned2018-01-30T05:55:45Z-
dc.date.available2018-01-30T05:55:45Z-
dc.date.issued2017-
dc.identifier.urihttp://repository.iiitd.edu.in/xmlui/handle/123456789/603-
dc.description.abstractMaterial properties of wide-bandgap semiconductors are excellent candidates to build highly-efficient and highly-linear power amplifiers required to support cellular communication. AlGaN/GaN HEMTs are considered the most capable of all available wide-bandgap devices, as they combine material properties of GaN with the principle of HEMTs. This dissertation presents a large-signal modelling strategy for small-sized (4*100 μm) AlGaN/GaN HEMT that is capable of being ported to computer-aided design of power amplifiers. A large signal model capable of simulating the output power and non-linear behavior of the device is very crucial for the design of a Power Amplifier. This is the main problem addressed by this thesis. Large signal modelling begins with the development of a linear model. A bottom-up empirical modelling approach is followed in this work. It required selecting an appropriate electrical equivalent circuit which accounted for the complex parasitic and maintained a clear physical interpretation of the model parameters. Further, an efficient algorithm for extracting and optimizing parasitic is adopted. This has set the foundation for non-linear modelling. The large-signal model includes a non-quasi static formulation of the gate-charge and a dispersive-drain current (Ids) model. Non-quasi static parameters are calculated from small-signal intrinsic parameters by using path-integrals. Various mathematical interpolation techniques are applied while doing integration taking care that the parameters do not lose their physical significance. The Ids-model parameter extraction is based on DC-IV and pulsed-IV measurements. Large-signal models are developed and directly implemented in CAD-software to perform model simulations. The results of the simulations performed are compared with the measured data. The results show high correlation between them making it a competent model for High Power Amplifier design for small-sized AlGaN/GaN devices.en_US
dc.language.isoen_USen_US
dc.subjectSemiconductorsen_US
dc.subjectCellular Communicationen_US
dc.subjectPower Amplifieren_US
dc.titleWide bandgap-HEMT device (GaN) modelling for high power amplifier designen_US
dc.typeThesisen_US
Appears in Collections:Year-2017

Files in This Item:
File Description SizeFormat 
MT15111_Shipra Batra.pdf1.65 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.